If you are setting up a new router or making changes to your home network, you may need to use the IP address 192.168.88.1. This is a private IP address that is typically assigned to routers and other devices on a local network. In this article, we’ll show you how to use the IP address 192.168.88.1 and what to do if it doesn’t work.
CONTENTS
What is 192.168.88.1?
192.168.88.1 is a Class C IP address in the private IP range. These private IPs are generally used for local area networks. The devices inside the network can communicate to each other using these IPs as the IP addresses are assigned to them automatically using DHCP. Besides DHCP, the IP can be assigned to a specific device manually, but it is important to take care not to have two devices in the network with the same IP. This causes an IP conflict which can have a negative effect on our network.
The IP address 192.168.88.1 is also used as a default IP address for some router models produced by MikroTik. As a default IP address, 192.168.88.1 allows the user to access the router settings and make some changes to either secure the network or take advantage of the basic and advanced router features.
For most people, 192.168.88.1 is only important when they want to access the router settings and that’s why we are going to show you the exact steps on how to access the router settings using 192.168.88.1.
Access The Admin Dashboard Using 192.168.88.1
When you want to set up your router or make some changes in the network settings, the first thing you need to do is to login to the router’s admin dashboard. It is an easy process but to make sure there are no problems we have to take care of a few things.
Before you login you need to get a device and you need to connect that device to your local network. You will also need the admin login details and you can easily find these on the router label or in the user’s manual. You can also try the following usernames and passwords.
Username: admin
Password: admin
or
Username: admin
Password: leave this field blank
You should gain access to the admin dashboard quickly if you have these things ready before you begin.
1. Connect the device to the network. This is the first and most important step because the router with the default gateway 192.168.88.1 and your device have to be part of the same network.
You can connect the device over WiFi if you know the wireless password or if the device can be connected using an Ethernet cable, use the wired type of connection.
2. After you make sure that you are connected, open the web browser on the device. Most certainly, you have Microsoft Edge or Google Chrome on the device so use one of these since most router manufacturers recommend using these two.
If you are using another web browser, try logging in using them, but if you notice any problems, please switch to one of the recommended web browsers.
3. When the web browser opens, type the IP address 192.168.88.1 into the URL bar. Then press the Enter key on the keyboard or tap on Go and you should see the router login page.
In case you see a blank page or an error message at this point, please refer to the Troubleshooting section of this article.
4. When asked to enter the router admin login details, type the ones we have provided above or the ones printed on the router label (although they should be the same). Please type the admin login details. Making a small typing error will make the login attempt unsuccessful.
Press the Login button now and you should be taken to the router’s admin dashboard. If this is the first time you are logging in you may be asked to change the admin password as well as the wireless network name and password. But if it isn’t, then you should have direct access to all the settings. Now you can customize the router settings without any limitations, but make sure to backup the settings first.
Can’t Login Using 192.168.88.1? Read These 20 Solutions
In most cases accessing your admin dashboard using the IP address 192.168.88.1 is easy and there are no problems at all. However, sometimes there may be an issue that prevents you from completing the login process successfully. These issues are closely connected to the connection, IP address, admin login details and some other things.
In the following section, we are going to give a checklist on what might be causing the problem and how to fix that.
1 Are you connected to the right WiFi network?
2. Are you using your cellular internet connection? Disable it and connect either over WiFi or using a wired connection.
3. Is Airplane Mode enabled? Disable it.
4. If there is a WiFi switch on the device check whether it is set to OFF?
5. If you are connected over an Ethernet cable check whether the connectors are loose and whether they are connected to the right ports.
6. Switch from wireless to wired connection.
7. Disable proxy settings.
8. Try logging in from another web browser or from another device.
9. Is 192.168.88.1 the correct router IP? Check this by yourself using the steps described here.
10. Type the IP correctly and avoid using letters instead of digits.
11. If you see a privacy warning click on Advanced and then on Proceed to 192.168.88.1.
12. Check the router label and use the admin username and password printed there.
13. Type the login details properly. Pay attention to Autocorrect if you are using your smartphone.
14. Use the custom login details if you know they have been changed.
15. If you have forgotten the custom username and password, you can login using the default ones but you need to reset the router to default settings first.
16. Disable your antivirus software.
17. Disable the popup blocker software if you have any installed.
18. Restart your wireless router
19. Restart your device
20. Contact Support (Your ISP or the router manufacturer and ask for their help).
Final Words
This is practically everything you need to know about the IP address 192.168.88.1. For the everyday user, the most important thing about 192.168.88.1 is to know how to use it to access its router settings. Of course, if something goes wrong, it is good to know that there is a solution that can help. We believe that one of the twenty solutions we have offered will help you overcome the current problem and login successfully.
Hey, I’m David. I’ve been working as a wireless network engineer and a network administrator for 15 years. During my studies, I also worked as an ISP field technician – that’s when I met Jeremy.
I hold a bachelor’s degree in network engineering and a master’s degree in computer science and engineering. I’m also a Cisco-certified service provider.
In my professional career, I worked for router/modem manufacturers and internet providers. I like to think that I’m good at explaining network-related issues in simple terms. That’s exactly what I’m doing on this website – I’m making simple and easy-to-follow guides on how to install, set up, and troubleshoot your networking hardware. I also review new network equipment – modems, gateways, switches, routers, extenders, mesh systems, cables, etc.
My goal is to help regular users with their everyday network issues, educate them, and make them less scared of their equipment. In my articles, you can find tips on what to look for when buying new networking hardware, and how to adjust your network settings to get the most out of your wi-fi.
Since my work is closely related to computers, servers, and other network equipment, I like to spend most of my spare time outdoors. When I want to blow off some steam, I like to ride my bike. I also love hiking and swimming. When I need to calm down and clear my mind, my go-to activity is fishing.